Raijintek today introduced the MYA RBW, a large aluminium fin tower-type CPU cooler with addressable RGB embellishments. The cooler was first shown off at Computex 2018. Its design involves a heavy aluminium fin-stack with ridged fins that have increased surface area over flat fins, capped off by a composite top, with a silicone RGB LED diffuser, and a brushed metal top-plate. Heat drawn by six 6 mm-thick nickel-plated copper heat pipes pass through the fin-stack.
At the base, these heat pipes make direct contact with the CPU. A 13 mm-thick slimline hydraulic bearing 120 mm fan compensates for the fin-stack’s thickness, as does the vertical offset in the fin-stack itself, freeing up room near your motherboard’s memory slot area. The fan spins between 200 to 1,400 RPM, pushing up to 41.71 CFM of air and a 28.43 dBA minimum noise level. Measuring 130 mm x 86 mm x 163 mm (WxDxH), the cooler weighs about 925 g, including the fan. Among the CPU sockets supported are Intel LGA2066, LGA115x, and AM4. The company didn’t reveal pricing.
