A Closer Look
Back cover for extra cable hiding. Fit your cables into the holes of the rear cover for case symmetric look and better cable management. Front, top, and rear panels can be completely removed for an easy access.
Thin vents on four corners of the case provide ventilation. Pop the top and front panels up slightly for even more cooling options. With a convenient magnetic system, feel free to increase the airflow or simply remove your panels for easy access to your fans.
The included Graphics Card Holder and red LED Strip are just two of an ever-growing range of accessories available with the MasterCase Series. There’s more to come in the following months as we come even closer to a future-proof, ultra modular design that you can swap and upgrade through the years without having to buy a new case every time tech jumps forward.
Exterior:
The exterior of the MasterCase Pro 6 is sleek and elegant
Smooth, flush panels and a large side window will complement softer and more refined home, gaming and office setups. The top panel is easy removed to make installation of fans or radiator a breeze. The front of the case has a nice grill with a Cooler Master logo in the lower center. The feet are unique and run the width of the case and are roughly about 2 1/2″ wide. These also have rubber on the bottom. Your access panel for all your USB’s and audio ports is conveniently located on the top. You have 2 USB 3.0, power button, reset button and you 3.5mm audio jacks. The side window is acrylic and is protected with a film during shipping. The design of the Pro series a nice sleek design.
Thin vents on four corners the of the case provide ventilation. Pop the top and front panels up slightly for even more cooling options.
USB and audio ports are hidden by a cover that blends seamlessly with the top panel
Interior:
The inside of the MasterCase Pro 6 is an all black scheme. You will notice the included fans, x1 120mm placed up front to keep the HDD’s nice and cool , along with the 140mm pre-installed in the rear. The cable management is worthy to note with the MasterCase Pro 6. As you can see there are a couple of Velcro straps on the back to keep everything tight and clean.
Back cover for extra cable hiding. Fit your cables into the holes of the rear cover for case symmetric look and better cable management.
The motherboard tray has a couple of pre installed stand-off but you will be required to install the rest. There are no dust filters on the front, rear, or top. There is one located below the power supply that slides in and out.
Now let us move on to the Installation part of the review!
