NZXT H6 Flow Chassis Review

Exterior

The NZXT H6 Flow is a compact dual chamber mid-tower ATX chassis measuring 435mm (h) x 287mm (w) x 415mm (d). It’s compatible with mini-ITX, micro-ATX and full-size ATX motherboards.

I like the unobstructed panoramic view, thanks to the wraparound tempered glass panels with the seamless edge. All the panels of the chassis are completely tool-less and can be easily removed, including the top, the side and the front panel for the angled fans.

Interior

There’s plenty of room inside the chassis so you can really dig your hands in there, specially when connecting those power and USB cables.

For cooling, you’ll find 3 pre-installed 120mm cooling fans which are angled to give you superb out-of-the-box cooling. Each fan has a speed of 1200rpm +/- 240 RPM, with an air flow of 62.18 CFM, and a noise level of 25.1 dBA.

You can easily fit a 360mm radiator at the top, plus it has clearance of up to 365mm for the GPU and 200mm for the power supply.

Sadly, you can’t fit a 360 radiator on the bottom of the chassis, but there’s enough room to install 2 x140mm cooling fans if needed.

On the other side, is the dual chamber where you can install your PSU. You’ll also find a HDD bracket for mounting 1 x 3.5″ hard drive and up to 2 x 2.5” hard drives.

The intuitive cable management system includes 3 velcro straps on the side and 2 more near the top. This will allow you to tidy up those messy looking cables.

Front Panel I/O

The front I/O ports include 1 x USB 3.2 Gen2 (Type-C), 2 x USB 3.2 Gen1, audio jackt, and a power-on switch, but no reset button.

To connect the front I/O panel to the motherboard, the chassis includes 1 x USB 3.2 cable, HD audio cable, front panel connector and USB Type-E.