ReviewsStorageUnboxing

Lexar NM800PRO 2TB PCIe Gen4x4 M.2 SSD Review

Test Bench

For our tests, we used our Test Rig which consists of an ASRock Z690 Taichi RAZER Edition motherboard, along with an Intel Core i9-12900KF, a ASRock Radeon RX 6750 XT graphics card, and 32GB Patriot Viper RGB DDR5-6200 memory kit.

 

* ALL tests are conducted at specified default speeds and settings.

CPU Intel Core i9-12900KF
Cooling Cooler Master MasterLiquid PL240 FLUX AIO cooler
Motherboard ASRock Z690 Taichi RAZER Edition
Ram Patriot Viper RGB DDR5-6200 32GB Memory Kit
XMP 3.0 profiles Yes
SSD Adata Legend 840 PCIE Gen4
Lexar NM800Pro PCIE Gen4
PSU Thermaltake ToughPower PF1 ARGB 1050W
VGA card ASRock Radeon RX 6750 XT
OS
Windows 11

 

 

AIDA64 Disk Information

As you can see from AIDA64 disk information, the Lexar NM800Pro supports NVMe 1.4,  PCIE 4.0 Gen4x4. It shows a total formatted capacity of 1,907GB, which is about right for a 2TB drive when you take it in to consideration.

 

CrystalDiskMark

CrystalDiskMark is a disk benchmark software.It measure sequential reads/writes speed,measure random 512KB, 4KB, 4KB (Queue Depth=32) reads/writes speed, select test data (Random, 0Fill, 1Fill), provide theme support and Multi-Language support.

During our CrystalDiskMark tests we managed to get a Read speed of 7,155 MB/sec with Write speeds of 6,605 MB/sec. It’s slightly below the advertised speed of 7,500Mb/sec.

 

ATTO Disk Benchmark

ATTO has created a widely-accepted Disk Benchmark freeware software to help measure storage system performance. As one of the top tools utilized in the industry, Disk Benchmark identifies performance in hard drives, solid state drives, RAID arrays as well as the host connection to attached storage. 

 

Anvil Storage

Anvil’s Storage Utilities is a powerful tool that was designed in order to provide you with a simple means of assessing the read and writer performance of your Solid State Drive or Hard Disk Drive.

In our Anvil tests, we managed to get a 4K QTD16 Read IOPS score of 322,726.89. While 4K QTD16 write IOPS score was at 593,894.30, which is pretty impressive.

 

Load Temps

Full load temperatures reached a high 58 degree Celsius, which is higher than I expected, but nothing to be concerned about. I guess the large integrated heatsink is more than adequate of cooling the SSD.

 

PCMark 10 – Full System Drive Benchmark

The Full System Drive benchmark uses a wide-ranging set of real-world traces from popular applications and common tasks to fully test the performance of the fastest modern drives.

This benchmark writes 204 GB of data to the drive over the duration of the test. This data is deleted when the test ends.

To run this test, you need a minimum of 80 GB of free space on the drive, 8 GB of RAM, and a quad-core CPU.

 

PassMark 9

Fast, easy to use, PC speed testing and benchmarking. PassMark PerformanceTest allows you to objectively benchmark a PC using a variety of different speed tests and compare the results to other computers.

 

Related posts

Leave a Comment

* By using this form you agree with the storage and handling of your data by this website.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More